[Project Topics] Hayabusa2 took images of the moon and Earth

JAXA performed an Earth swing-by operation of the “Hayabusa2” on the night of Dec 3 （Thu.）, 2015 （Japan Standard Time）. The “Hayabusa2 flew closest to the Earth at 7:08 p.m. （JST） and passed over the Pacific Ocean around the Hawaii islands at an altitude of about 3,090 km.
After its closest flight to the Earth, we have confirmed the good health of the “Hayabusa2”.
It will take about a week to confirm if the explorer entered the target orbit.

The Hayabusa2, which is flying closer to the Earth for its scheduled swing-by, photographed the moon and the Earth simultaneously using its onboard Optical Navigation Camera-Telephoto (ONC-T) at 12:46 p.m. on November 26, 2015 (Japan Standard Time).
On the right is the Earth, and you can see the moon on the left. The ONC-T has a multiple number of filters for observing the asteroid “Ryugu”. The image data this time was acquired by using three of the filters, and a pseudo-color image was compiled by assigning the three as R (red), G (green) and B (blue). The distance between the Hayabusa2 and the Earth was about three million kilometers.
You can see the Australian continent on the right, the Eurasian continent covered by clouds on the left, and the white vertical areas between them are clouds over the equator.
The ONC-T was jointly developed by JAXA, the University of Tokyo, Chiba Institute of Technology, Rikkyo University, Meiji University, Nagoya University, the University of Aizu, and Kochi University.

*The images here were trimmed for the sake of the website. Please have a look at JAXA Digital Archives for the original image.

The Asteroid Explorer “Hayabusa2” will fly near the Earth to perform an Earth swing-by utilizing the Earth’s gravity on Dec. 3 (Thur.) for its orbit control.
The Hayabusa2, which soared into space on Dec. 3, 2014, will coincidentally come close to the Earth on Dec. 3 (Thur.), 2015, to conduct the Earth swing-by. The explorer will fly closest to the Earth at around 7:07 p.m. on that day (Japan Standard Time).
After the swing-by, the Hayabusa2 will head to its target asteroid “Ryugu”. Your support for the mission will be very welcomed. We are waiting for your support messages to the explorer itself, project personnel, and the overall mission.

Asteroid 1999 JU3, a target of the Asteroid Explorer “Hayabusa2,” was named “Ryugu”.
One major reason for the selection was that, in the Japanese ancient story “Urashima Taro”, the main character, Taro Urashima, brought back a casket from the Dragon’s palace, or the “Ryugu” Castle, at the bottom of the ocean, and the theme of “bringing back a treasure” is common as the Hayabusa2 will also bring back a capsule with samples. It was selected among 7,336 entries.
The Lincoln Near Earth Asteroid Research (LINEAR) Team of the United States, which discovered 1999 JU3, proposed the suggested name of “Ryugu” to the International Asteroid Union (IAU), and it was finalized by being listed on the Minor Planet Names: Alphabetical List of the IAU Minor Planet Center.
Thank you very much to so many of you who took part in the naming campaign.

On Sept. 1 (Tue.) and 2 (Wed.), the ion engine of the Hayabusa2 was additionally operated in order to increase the orbit control accuracy for the Earth swing-by.
The additional jet emission was completed as scheduled, and the ion engine was operated for about 12 hours in total.
We will analyze telemetry data (data sent from the explorer to indicate its condition) in detail to confirm the status of the engine during the operation and orbit control before and after the emission.
Figure: Positional relation of Hayabusa2, the Earth, the Sun, and Asteroid 1999JU3 (Schematic as of Sept. 1, 2015)

JAXA is holding a naming proposal campaign to christen the asteroid “1999 JU3″,which the Hayabusa2 is scheduled to visit in June or July 2018. Why don’t you try to become a godparent of the asteroid?
The application period is from 1:30 p.m. on July 22 thru 11:59 p.m. on August 31 (Japan Standard Time.)

August 31, 2015 at 11:59 p.m. (Japan Standard Time). (Extended from 10:00)

The Hayabusa2 has been continuously operating its ion engine for the second time since June 2, and successfully completed its operations at 0:25 a.m. on　June 7 (Japan Standard Time.) The second continuous operation lasted for 102 hours as scheduled.
The Hayabusa2 performed the ion engine continuous operation in preparation for the Earth swing-by planned in December, and the total hours of the first and second operations (409 hours and 102 hours respectively) reached 511 hours.
The ion engine operation may be conducted again if needs arise for subtle orbit change after carefully examining the second operation result.

The Hayabusa2 is stably flying in space. The new fiscal year has just started in Japan, and JAXA is taking a new step　as we became a National Research and Development Agency from the previous independent administrative agency. The Hayabusa2 project is also taking a fresh step with a new team, including handing the baton over to a new project manager. All members of the project are engaged in the mission with a fresh mindset.

The Hayabusa2 is stably flying since its launch and smoothly continuing it interplanetary cruising. I can, therefore, take over the mission at the best condition from my predecessor, former Project Manager Hitoshi Kuninaka, who led the development of the project. With many operation experts joining the new team, we would like to successfully send the Hayabusa2 to the asteroid 1999JU3, and have it come home safely.
The Hayabusa2 mission is challenging an unexplored field. We would like to contribute to enhancing the value of technology, science and space exploration through our accomplishments in traveling through the solar system in this six-year mission.

As the development phase is over, Hayabusa2’s deep space exploration has started.
At the beginning of this fiscal year, a multiple number of our project members including myself were subject to personnel changes. Our team worked well with good team spirit to tackle and overcome various obstacles and difficulties. Therefore, I felt a bit disappointed to see part of the team was shuffled. Having said that, those who remain in the team as well as the leaving members vow to work hard and do our best using our expertise in space projects no matter what department we are assigned to. Your continued support for the Hayabusa2 is very much appreciated.

Photo: left: New Project Manager Yuichi Tsuda, right: Former Project Manager Hitoshi Kuninaka

The Asteroid Explorer “Hayabusa2,” launched on Dec. 3, 2014, completed its initial functional confirmation period of about three months. The explorer was moving to the cruising phase on March 3 while heading to the asteroid “1999 JU3.”
The Hayabusa2 is in good health. It will be under preparatory operation including speed increase by continuous operation of the ion engines for an Earth swing-by scheduled in Nov. or Dec., 2015.

The Hayabusa2, launched on Dec. 3, 2014 (JST), is now undergoing the initial functional confirmation. Basic operations and performance of onboard instruments and ground systems have been tested one by one as of the end of January.
Here are some major examples of what we confirmed.

The explorer is currently in good shape.
We will further confirm the coordinated function of multiple instruments of the Hayabusa2, and plan to move to the cruise operation phase (*2) sometime in March.

*1 The autonomous operation is automatic control of an engine without instructions from the ground.
*2 The mode of full-scale navigation operation toward the asteroid through acceleration and orbit control by ion engine thrust.

JAXA confirmed the completion of a sequence of the important operations for the “Hayabusa2” mission. With this confirmation, the critical operation phase* of the Hayabusa2 was completed.
The explorer is now in a stable condition.

We would like to express our sincere appreciation to all parties and personnel concerned for their support and cooperation with the Hayabusa2 launch and tracking control operations.
In addition, we would also like to ask for your continued cooperation and support for the long-term Hayabusa2 space exploration mission.

Please send your support messages for the mission! (you can send a message from Hayabusa2 Project page or tweet with hashtag #hayabusa2 ).

H-IIA F26 with the Asteroid Explorer “Hayabusa2” onboard launched at 1:22:04 p.m. on Dec 3, 2014 (JST) from the Tanegashima Space Center.
The rocket flew smoothly, and, at about approximately one hour, 47 minutes and 21 seconds after liftoff, “Hayabusa2” was separated from the H-IIA F26. We will update you with the latest information on the “Hayabusa2” on the project page.
Please send your support messages for the mission! (you can send a message from Hayabusa2 Project page or tweet with hashtag #hayabusa2 ).

Mitsubishi Heavy Industries, Ltd. and JAXA have decided to postpone the launch of “Hayabusa2” and piggyback payloads by the H-IIA F26 to 1:22:04 p.m. on Dec 3 (Wed. JST).

The live launch report will begin at 12:25 p.m. on December 3 (Mon. , JST). The report will be broadcast through the Internet.
Please send your support messages for the mission! (you can send a message from Hayabusa2 Project page or tweet with hashtag #hayabusa2 ).

We decided to postpone as a result of the go/no go decision meeting today which carefully checked the weather forecast and found that strong wind exceeding the weather restrictions was projected around the launch pad at the scheduled launch time on the previous schedule launch day of Dec. 1 (Mon.), 2014.
*The launch may be delayed further depending on weather conditions and other factors.

The launch of the Asteroid Explorer “Hayabusa2” and three micro piggyback payloads by the H-IIA Launch Vehicle No. 26 was rescheduled at 1:22:43 p.m. on December 1 (Mon. Japan Standard Time, JST) after carefully studying the weather conditions.
Accordingly, the live launch report will begin at 12:25 p.m. on December 1 (Mon. , JST). The report will be broadcast through the Internet.
Please send your support messages for the mission, or tweet it including the hashtag #hayabusa2 .

H-IIA Launch Vehicle No.26 with the Asteroid Explorer “Hayabusa2” onboard has been rescheduled as clouds including a freezing layer that exceeds the restrictions for suitable weather are forecast to be generated at around the scheduled launch time on November 30 (Sun.), 2014 (Japan Standard Time.)
The new launch day will be announced as soon as it is determined.

The new video clip titled “Ready to Face New Challenges -Hayabusa2- ” was uploaded to the YouTube.
It has been four years since the Hayabusa’s dramatic return from space,bringing back the world’s first samples from an asteroid. To further clarify the mystery of the origin and evolution of human beings, the Hayabusa2 is leaving for space. This video explains the special features and significance of the Hayabusa2 mission in an easy and simple manner.

JAXA will broadcast a live report of the Asteroid Explorer Hayabusa2’s launch by the H-IIA Launch Vehicle No.26 (H-IIA F26) from the Tanegashima Space Center. The report will cover launch events from the liftoff to the payload separation from the launch vehicle.

The broadcast program consists of two parts. The first half mainly focuses on launch events prior to and after liftoff. Then the latter half covers events before and after the Hayabusa2’s separation from the launch vehicle.

*Please be aware that the time schedule of the program is subject to change due to progress of the launch operations.

Part I
Prior and after liftoff of H-IIA F26/Hayabusa2

*The scheduled launch time is 1:24 p.m.

Part I broadcast day and time
12:30 p.m. thru 1:45 p.m. (75 minutes) on Nov. 30 (Sun.)

* Images of piggyback payloads’ separation will NOT be broadcast.
* Hayabusa2’s separation is scheduled to take place one hour and 47 minutes after liftoff.

Part II broadcast day and time
3:00 p.m. to 3:30 p.m. (30 minutes) on Nov. 30 (Sun.)

JAXA will distribute our live report through the following Internet channels.

* The copyright of the live broadcast belongs to JAXA.
* Please be aware that a slight time lag up to a few minutes may occur due to the Internet’s characteristics.

We are welcoming support messages at the special site. Please send your messages for the mission, or tweet it. To tweet on Twitter, please attach the hashtag, #hayabusa2 .
Click the following link to send a message to JAXA.

The launch date and time for the H-IIA Launch Vehicle No. 26 (H-IIA F26) with the Asteroid Explorer “Hayabusa2” onboard was decided to be at 1:24:48 p.m. on November 30 (Sunday), 2014 (Japan Standard Time)*.
Launch site is Yoshinobu Launch Complex at the Tanegashima Space Center.
* Launch time will be set for each launch day if the launch is delayed.

The latest information about “Hayabusa2” and its launch preparation status will be updated on the “Hayabusa2” project page.
We welcome your support message for the Hayabusa2.
Please send your support messages for the mission, or tweet it including the hashtag #hayabusa2 .

The Asteroid Explorer “Hayabusa2” was shown to the media at Sagamihara Campus on August 31, 2014.

The Hayabusa2 is the successor of the Hayabusa, which captured sample particles from an asteroid and returned to the Earth in 2010. By capitalizing on the experience of the Hayabusa, the Hayabusa2 aims at acquiring samples and bringing them back from the C-type asteroid “1999JU3” to elucidate the origin and evolution of the solar system and material for life.

“I am bracing for the new voyage of the Hayabusa2.” said Project Manager Kuninaka.
The Hayabusa2 will be transferred to the Tanegashima Space Center for its launch in this winter after its final check there.

Hayabusa2’s Small Carry-on Impactor (SCI) underwent a test in October, 2013.
The SCI is a device to create an artificial crater of the asteroid 1999JU3, which the Hayabusa 2 will travel toward. By making and observing an artificial crater, we can acquire data not only about the surface but also about the inside of the asteroid. In addition, by sampling near the crater, we can collect inside samples of the asteroid.
Hayabusa2 applies a method to throw a metal projectile against the asteroid with high speed to create an artificial crater. Through the test this time, we confirmed the accelerating part of the projectile while aiming to verify if its speed, configuration, and thrown direction precision met the design when the pyrotechnics, which were comparable to those of actual ones for the flight, were ignited to set off the projectile.
The test results were very impressive as the speed and configuration were almost as designed, and the direction precision was also good as the SCI precisely hit a target that was 100 meters away. We were able to successfully complete the performance confirmation test of the SCI pyrotechnic part.

Hayabusa2 SCI test [JAXA Digital Archives]